Beiträge von nikosjoker

thank you very much for the help but I finally found the problem where it was and now it cuts plywood 3mm with 2 times and mdf 3mm 5 times I went through the software again and the problem happened

I don't know what else to do, I think I've got it all... unless the laser has a problem when it goes off.

Thanks a lot for helping me.

V4.00(8M.H35.20230918)]

[VER:1.1h.2023091801:]

[OPT:VMPH,63,256]

Target buffer size found

[MSG:Using machine:MKS DLC32]

$0=10

$1=25

$2=0

$3=5

$4=0

$5=0

$6=0

$10=1

$11=0.010

$12=0.002

$13=0

$20=0

$21=0

$22=0

$23=5

$24=300.000

$25=1000.000

$26=250.000

$27=1.000

$28=1000.000

$30=1000.000

$31=0.000

$32=1

$41=1

$47=1

$46=1

$102=100

$101=80

$45=0

$44=1

$43=1

$42=1

$50=2

$40=1

$100=80.000

$103=100.000

$104=100.000

$105=100.000

$110=10000.000

$111=10000.000

$112=6000.000

$113=1000.000

$114=1000.000

$115=1000.000

$120=2500.000

$121=2500.000

$122=500.000

$123=200.000

$124=200.000

$125=200.000

$130=301.000

$131=301.000

$132=50.000

$133=300.000

$134=300.000

$135=300.000

ok

Its ok ??

is there a chance that the laser is broken and can make good engravings and not cut???

s value max 1000 i have

Hello I have two trees 55 pro now I bought it and I have a problem with the laser not cutting at all. Graves does well 2000 speed 60 power.

I put it to cut 10 speed 100 power 5 pass 3mm mdf

And the result is almost like an engraving. It cuts very little.

Γεια σας, έχω δύο δέντρα 55 pro τώρα το αγόρασα και έχω πρόβλημα με το λέιζερ που δεν κόβει καθόλου. Graves κάνει καλά 2000 ταχύτητα 60 δύναμη.

Το έβαλα να κόψει 10 ταχύτητα 100 δύναμη 5 πέρασμα 3mm mdf

Και το αποτέλεσμα είναι σχεδόν σαν χαρακτική. Κόβει ελάχιστα.

ΜΠΟΡΩ να εχω βοηθεια

γεια σας ειμαι νεος με το σπορ και εχω προβλημα με το λειζερ μου δεν κοβει τιποτα .. αλλα γκραβουρες κανει πολλυ καλα θα ελεγα

μπορω να εχω μια βοηθεια σασ παρακαλω