Hallo Plotmania
Das komische ist ja das alles schon funktioniert hat und plötzlich nicht mehr. Ich weis echt nicht was ich angestellt habe.
Endschalter stehen ( siehe Beitrag oben ) sind auch so in Lightburn eingestellt. Hab es ja auf zwei Rechner installiert und auf beiden das gleiche Problem.
Darum glaube ich das es eine Lasereinstellung ist.
Hallo. Danke für dein Antwort. Hoffentlich kannst du mirt helfen.
Er steht richtig. Endschalter sind am Startpunkt hinten links und einer am Laserarm links. Komischerweise hat es ja schon funktioniert und jetzt nicht mehr.
Diese Meldung:[MSG: Your device is not at GRBL mode, Please restart to switch to GRBL mode.]war bestimmt 100 mal drinnen. Hab ich nicht alle reinkopiert da sonst die Meldung zu lang war
Auf Verbindung warten...
ok
[VER:1.1f.NEJE build version:v2.1.0:]
[OPT:VMZHL,199,1000]
Target buffer size found
ok
Homing
ok
ok
<Idle|MPos:0.000,420.000,0.000,0.000|Bf:199,1500|FS:0,0|Pn:P|WCO:0.000,0.000,0.000,0.000>
ok
Stream wird gestartet
[MSG: Laser temperature:24.8C]
Stream fertiggestellt in 0:07
ALARM:3
In Bewegung zurücksetzen. Grbl kann die Position nicht garantieren. Verlorene Schritte sind wahrscheinlich. Die Rückkehr zur Ausgangsposition wird dringend empfohlen.
ok
Grbl 1.1f ['$' for help]
[MSG: GRBL offline working see: https://www.neje99.com/t1 ]
[MSG:'$H'|'$X' to unlock]
[MSG:Caution: Unlocked]
ok
ok
<Idle|MPos:0.000,420.000,0.000,0.000|Bf:199,1500|FS:0,0|Pn:P|WCO:0.000,0.000,0.000,0.000>
ok
Stream wird gestartet
[MSG: Laser temperature:24.8C]
Stream fertiggestellt in 0:07
[MSG: Your device is not at GRBL mode, Please restart to switch to GRBL mode.]
Grbl 1.1f ['$' for help]
[MSG: GRBL offline working see: https://www.neje99.com/t1 ]
<Idle|MPos:0.000,0.000,0.000,0.000|Bf:199,1500|FS:0,0|Pn:P|WCO:0.000,0.000,0.000,0.000>
ok
ok
<Idle|MPos:0.000,420.000,0.000,0.000|Bf:199,1500|FS:0,0|Pn:P|Ov:100,100,100>
ok
Stream wird gestartet
Auftrag angehalten
Stream fertiggestellt in 0:00
Grbl 1.1f ['$' for help]
[MSG: GRBL offline working see: https://www.neje99.com/t1 ]
ok
<Idle|MPos:0.000,420.000,0.000,0.000|Bf:199,1500|FS:0,0|Pn:P|WCO:0.000,0.000,0.000,0.000>
ok
Stream wird gestartet
[MSG: Laser temperature:24.8C]
Stream fertiggestellt in 0:03
<Idle|MPos:55.000,164.375,0.000,0.000|Bf:199,1500|FS:0,0|Pn:P|Ov:100,100,100|A:S>
ok
Stream wird gestartet
[MSG: Laser temperature:24.8C]
Stream fertiggestellt in 0:01
Aktualisierung der Rotationseinstellung erfolgreich
[MSG: Your device is not at GRBL mode, Please restart to switch to GRBL mode.]
[MSG: Your device is not at GRBL mode, Please restart to switch to GRBL mode.]
[MSG: Your device is not at GRBL mode, Please restart to switch to GRBL mode.]
[MSG: Your device is not at GRBL mode, Please restart to switch to GRBL mode.]
[MSG: Your device is not at GRBL mode, Please restart to switch to GRBL mode.]
Grbl 1.1f ['$' for help]
[MSG: GRBL offline working see: https://www.neje99.com/t1 ]
ok
<Idle|MPos:0.000,420.000,0.000,0.000|Bf:199,1499|FS:0,0|Pn:P|WCO:0.000,0.000,0.000,0.000>
ok
Stream wird gestartet
[MSG: Laser temperature:23.4C]
Stream fertiggestellt in 0:04
Stream wird gestartet
Layer Hartholz
[MSG: Laser temperature:23.4C]
[MSG: Laser temperature:24.5C]
[MSG: Laser temperature:24.7C]
[MSG: Laser temperature:24.9C]
[MSG:Pgm End]
Stream fertiggestellt in 0:37
Grbl 1.1f ['$' for help]
[MSG: GRBL offline working see: https://www.neje99.com/t1 ]
<Idle|MPos:0.000,0.000,0.000,0.000|Bf:199,1499|FS:0,0|Pn:P|WCO:0.000,0.000,0.000,0.000>
ok
ok
ok
Stream wird gestartet
[MSG: Laser temperature:24.5C]
[MSG:Pgm End]
Stream fertiggestellt in 0:04
<Idle|MPos:0.000,0.000,0.000,0.000|Bf:199,1499|FS:0,0|Pn:P|WCO:0.000,0.000,0.000,0.000>
ok
Stream wird gestartet
Stream fertiggestellt in 0:02
Grbl 1.1f ['$' for help]
[MSG: GRBL offline working see: https://www.neje99.com/t1 ]
ok
ok
ok
ok
ok
ok
ok
ok
[VER:1.1f.NEJE build version:v2.1.0:]
[OPT:VMZHL,199,1000]
Target buffer size found
ok
Homing
ok
Stream wird gestartet
[MSG: Laser temperature:24.5C]
[MSG:Pgm End]
Stream fertiggestellt in 0:04
<Idle|MPos:0.000,0.000,0.000,0.000|Bf:199,1500|FS:0,0|Pn:P|WCO:0.000,0.000,0.000,0.000>
ok
Stream wird gestartet
[MSG: Laser temperature:24.5C]
[MSG:Pgm End]
Stream fertiggestellt in 0:00
<Idle|MPos:0.000,10.000,0.000,0.000|Bf:199,1500|FS:0,0|Pn:P|WCO:0.000,0.000,0.000,0.000>
ok
Stream wird gestartet
[MSG:Pgm End]
Stream fertiggestellt in 0:00
<Idle|MPos:0.000,20.000,0.000,0.000|Bf:199,1499|FS:0,0|Pn:P|WCO:0.000,0.000,0.000,0.000>
ok
Stream wird gestartet
[MSG:Pgm End]
Stream fertiggestellt in 0:00
<Idle|MPos:0.000,30.000,0.000,0.000|Bf:199,1500|FS:0,0|Pn:P|WCO:0.000,0.000,0.000,0.000>
ok
Stream wird gestartet
[MSG:Pgm End]
Stream fertiggestellt in 0:00
<Idle|MPos:0.000,40.000,0.000,0.000|Bf:199,1499|FS:0,0|Pn:P|WCO:0.000,0.000,0.000,0.000>
ok
Stream wird gestartet
[MSG:Pgm End]
Stream fertiggestellt in 0:00
<Idle|MPos:0.000,50.000,0.000,0.000|Bf:199,1500|FS:0,0|Pn:P|WCO:0.000,0.000,0.000,0.000>
ok
Stream wird gestartet
[MSG:Pgm End]
Stream fertiggestellt in 0:00
<Idle|MPos:0.000,60.000,0.000,0.000|Bf:199,1500|FS:0,0|Pn:P|WCO:0.000,0.000,0.000,0.000>
ok
Stream wird gestartet
[MSG:Pgm End]
Stream fertiggestellt in 0:00
<Idle|MPos:0.000,70.000,0.000,0.000|Bf:199,1499|FS:0,0|Pn:P|WCO:0.000,0.000,0.000,0.000>
ok
Stream wird gestartet
[MSG:Pgm End]
Stream fertiggestellt in 0:00
<Idle|MPos:0.000,80.000,0.000,0.000|Bf:199,1500|FS:0,0|Pn:P|WCO:0.000,0.000,0.000,0.000>
ok
Stream wird gestartet
[MSG:Pgm End]
Stream fertiggestellt in 0:00
<Idle|MPos:10.000,80.000,0.000,0.000|Bf:199,1500|FS:0,0|Pn:P|WCO:0.000,0.000,0.000,0.000>
ok
Stream wird gestartet
[MSG:Pgm End]
Stream fertiggestellt in 0:00
<Idle|MPos:20.000,80.000,0.000,0.000|Bf:199,1500|FS:0,0|Pn:P|WCO:0.000,0.000,0.000,0.000>
ok
Stream wird gestartet
[MSG:Pgm End]
Stream fertiggestellt in 0:00
<Idle|MPos:30.000,80.000,0.000,0.000|Bf:199,1499|FS:0,0|Pn:P|WCO:0.000,0.000,0.000,0.000>
ok
Stream wird gestartet
[MSG:Pgm End]
Stream fertiggestellt in 0:00
<Idle|MPos:40.000,80.000,0.000,0.000|Bf:199,1500|FS:0,0|Pn:P|WCO:0.000,0.000,0.000,0.000>
ok
Stream wird gestartet
[MSG:Pgm End]
Stream fertiggestellt in 0:00
<Idle|MPos:50.000,80.000,0.000,0.000|Bf:199,1499|FS:0,0|Pn:P|WCO:0.000,0.000,0.000,0.000>
ok
Stream wird gestartet
[MSG:Pgm End]
Stream fertiggestellt in 0:00
<Idle|MPos:60.000,80.000,0.000,0.000|Bf:199,1500|FS:0,0|Pn:P|WCO:0.000,0.000,0.000,0.000>
ok
Stream wird gestartet
[MSG: Laser temperature:24.5C]
[MSG:Pgm End]
Stream fertiggestellt in 0:00
<Idle|MPos:70.000,80.000,0.000,0.000|Bf:199,1500|FS:0,0|Pn:P|WCO:0.000,0.000,0.000,0.000>
ok
Stream wird gestartet
[MSG:Pgm End]
Stream fertiggestellt in 0:00
<Idle|MPos:80.000,80.000,0.000,0.000|Bf:199,1500|FS:0,0|Pn:P|WCO:0.000,0.000,0.000,0.000>
ok
Stream wird gestartet
[MSG:Pgm End]
Stream fertiggestellt in 0:00
<Idle|MPos:90.000,80.000,0.000,0.000|Bf:199,1500|FS:0,0|Pn:P|WCO:0.000,0.000,0.000,0.000>
ok
Stream wird gestartet
[MSG:Pgm End]
Stream fertiggestellt in 0:00
<Idle|MPos:100.000,80.000,0.000,0.000|Bf:199,1499|FS:0,0|Pn:P|WCO:0.000,0.000,0.000,0.000>
ok
Stream wird gestartet
[MSG:Pgm End]
Stream fertiggestellt in 0:00
<Idle|MPos:110.000,80.000,0.000,0.000|Bf:199,1500|FS:0,0|Pn:P|WCO:0.000,0.000,0.000,0.000>
ok
Stream wird gestartet
[MSG:Pgm End]
Stream fertiggestellt in 0:00
$$
$0=10
$1=255
$2=0
$3=1
$4=0
$5=0
$6=0
$10=3
$11=0.010
$12=0.002
$13=0
$20=0
$21=0
$22=1
$23=1
$24=250.000
$25=2500.000
$26=250
$27=1.000
$30=1000
$31=0
$32=1
$40=0.200
$41=10
$42=10
$43=0
$100=80.000
$101=80.000
$102=800.000
$103=8.889
$110=15000.000
$111=15000.000
$112=1200.000
$113=21600.000
$120=250.000
$121=250.000
$122=20.000
$123=250.000
$130=255.000
$131=420.000
$132=45.000
$133=360.000
ok
Hallo
Erst einmal Servus an alle im Forum.
Bin neu hier und völlig neu auf dem Lasergebiet. Habe auf Weihnachten eien Neje3 plus bekommen.
Habe auch schon einige Erfolge erzielt.
Sei einigen Tagen stehen meine Gravuren aber Kopf über.
Mein Startpunkt ist hinten links. Benutze die Lightburn Software. Zum Gravieren beginnt er vorne links und stellt die Motive auf dem Kopf. Das Motiv ist in Lightburn oben links plaziert. Wenn ich den Rahmen abfahre startet er längsseitig gegenüber.
Kann mir jemand weiterhelfen. Habe die Software auf einem PC und einem Laptop installiert. Bei beiden das gleiche Ergebnis. Bei Hilfe bitte die Lösung einfach formulieren, da ich nicht mehr der Jüngste bin.
Danke im vorraus
