Da ziehst du dir bitte das aktuelle RDWorks V8 und auch das User Manual RDWorks V8 ( alles recht weit oben )
okay dann versuche ich es mal mit der
Da ziehst du dir bitte das aktuelle RDWorks V8 und auch das User Manual RDWorks V8 ( alles recht weit oben )
okay dann versuche ich es mal mit der
ist rd works die beste von den 3 weil da gibt es ja auchnoch 2 andere lasermaker und lightburn
Lasermarker ist nichts für deinen Controller und Lightburn ist nur ein paar Wochen kostenlos, dann musst du das bezahlen, aber dafür ist es sehr gut.
Mach bitte deine ersten Schritte mit RDWorks bitte, du musst erst mal schauen mit dem Laser in den Grundfunktionen klar zu kommen, danach kannst du auch locker auf Lightburn wechseln
Mir kommt da gerade etwas in den Sinn ?
Mach mal bitte ein Foto von deinem Display am Laser bitte.
Nicht das wir versuchen, dir RDWorks einzutrichtern und du hast einen anderen Controller da im Laser verbaut.
Das wäre ein bissle Gaga
Fotos kannst du im Antwortmenü einfach anhängen
Das ist der Display
Hhmmm. eine Oem Version...
Mach mal bitte rechts die Seitenklappe auf , da müsste eine weiße Kiste drinn sein aus Plastik, mach mal davon bitte ein Foto
die hier ?
Ryxon KT332N
Tja... jetzt bin ich überfragt...
hmm okay heißt aber das es trotzdem funktionieren sollte oder ?
Ich hab es jetzt nämlich erneut Versucht und da kommt jedes mal Kommunikationsfehler....
Das ist ein Clone. Im Lightburnforum sind einige, die sich beschweren.
Du kannst probieren mit der Lightburnsoftware in den Controller zu kommen, aber anscheinend funktioniert dann die Z-Achse nicht.
Ist dir der laser verkauft worden mit einem Ruida Controller ?
Hier der link zum hardwarehersteller.... viel Spaß beim Koreanisch lernen ...
https://www.ryxon.cn/productinfo/108372.html
Eine unglaubliche Volksverarschung sowas...
ah... da ist die U Achse mit verarbeitet in der Firmware, wenn ich das jetzt richtig überflogen habe..
Anscheinend spielt da Ruida doch mit....
Probier mal Lightburn, das kannst du ja 4 Wochen testen mit allen Funktionen.
okay das ist echt nicht gut... aber ich kann dann theoretisch den laser vorerst über den usb stick laufen lassen?
Probier mal Lightburn, das kannst du ja 4 Wochen testen mit allen Funktionen.
Was kostet die normal ?
wo soll ich die Downloaden?
ah... da ist die U Achse mit verarbeitet in der Firmware
was hat die für ne funktion?
Aus dem Lightburn Forum:
To the best of my knowledge, the Ryxon KT332N controller started shipping this year, and is only used on one CO2 laser engraver model as of this writing. (Note: there appear to be multiple model numbers for the same machine, some of them of which are known as Preenex Aoshen USB-6B57, USB570-60W, USB-320S-BW, USB-6R57-US all of which are 60W, 28x20, with motorized Z-axis and Autofocus.) According to the manufacturer, the KT332N is made by Ruida and is based on the Ruida 6442. LightBurn recognizes it as a Ruida 644XG.
The Ryxon panel has extra buttons, such as Aux Air, Focus, dedicated buttons for Z axis, continuous/momentary Up and Down, and a separate Menu button, which are a nice improvement over the 6442. Oddly, they removed the Min and Max Speed buttons,
On the controller side, the KT332N is a little more stripped down, but nothing that the typical user would miss. The most noticeable is that it has connectors for only three axes (versus four on the 6442) and it does not have a connector for a second laser tube. The KT332N has an X, Y and U axis. The U-axis is used for the rotary, in comparison to the 6442 which uses the Z-axis for the rotary and the U-axis for the seldom used conveyor control. The KT332N also lacks status LEDs. Lastly, the limit switches have been combined onto a single connector. The KT332N does have ethernet, although it is not labeled.
Tolle Wurst...
der Downloadlink zur Software RXWorks auf der koreanischen Herstellerseite ist tot.
Hast du denn jetzt den USB Treiber installiert bekommen ?